Function Of Vertical Milling Machine

2018-12-19 10:09:53

Function Of Vertical Milling Machine

Vertical Milling Machine fineness

Six factors affecting the fineness of Vertical Milling Machine

The first factor, the grader opening height, size:

In many grinding production lines, because the size of the opening of the classifier is not adjusted when the equipment is installed, and the workers do not pay attention to the operation, it also affects the grinding operation and the fineness of the grinding. Therefore, in the installation and production, we must pay attention to check the size and height of the opening of the classifier.

The second factor, the effect of fineness:

The same material, the same type of Vertical Milling Machine, the finer the fineness of the powder, the lower the output, and vice versa. For example, if the powder is required to be 2,500 mesh and the powder is 80 mesh, the output of 3000 mesh will be lower than that of the direct-extracted 80 mesh due to the secondary or multiple classification of the Vertical Milling Machine.

The third factor, the grader spindle lifting height:

In normal normal grinding production, the classifier spindle is required to be placed in place. In some concentrating plants, since the materials in the classifier are not cleaned up, the sinking is caused by solidification for a long time, which will cause the spindle of the classifier to be out of position, thereby reducing the amount of sand return. In addition, the grader spindle is not placed in place. It may be because the spindle has not been cleaned and oiled for a long time, so pay more attention to regular cleaning during operation.

The fourth factor, the quality of the Vertical Milling Machine itself:

Vertical Milling Machines produced by Vertical Milling Machine suppliers have different quality, different energy consumption, and of course the difference in fineness.

The fifth factor is affected by the hardness of the material (Bond work index):

Different ores have different hardnesses, which are determined by the nature of the ore and directly affect the grinding difficulty and fineness of the ore. Although the hardness of the ore cannot be changed, when we carry out the grinding production, we can make the size of the ore as uniform as possible, and the block-like and powdery ore ratio is reasonable and stable to achieve reasonable and uniform grinding. Fineness.

The sixth factor, the air pressure in the area where the material is ground:

The same Vertical Milling Machine, at different altitudes, due to the different air pressure, the air pressure of the air compressor will affect the grinding efficiency, and the fineness of the powder is naturally affected by different procedures.

The above are the six influencing factors of the fineness of the Vertical Milling Machine introduced by SBM. I hope to help you better production and let everyone get better benefits.

Leave Message

Raw Ore Milling Equipment In Cement Plant 2018-12-19 10:09:53

Precautions of Raw Ore Milling EquipmentA company's 2000t/d new dry process cement production line and raw meal preparation system adopt Raw Ore Milling Equipme

Roller Ore Milling Equipment For Sale 2018-12-19 10:09:53

Roller Ore Milling Equipment Vibration ReasonThe Roller Ore Milling Equipment is very easy to stop in the later operation, and there are many reasons for the vi

Continuous Ball Ore Milling Equipment 2018-12-19 10:09:53

Continuous Ball Ore Milling Equipment "Run Rough"Continuous Ball Ore Milling Equipment is widely used in mine, metallurgy, cement and other industries. It is an

Garnet Ore Milling Equipment 2018-12-19 10:09:53

Installation and maintenance of Garnet Ore Milling EquipmentThe maintenance of Garnet Ore Milling Equipment is a very important and regular job. It should coope

Cement Vertical Ore Milling Equipment 2018-12-19 10:09:53

How To Improve The Performance Of Cement Vertical Ore Milling EquipmentVertical Ore Milling Equipment in the coal mine is widely used, with China's economy and

T130X Strengthen Ultrafine Mill 2018-12-19 10:09:53

T130X Strengthen Ultrafine Mill, which is based on the market research, and statistically analyzes the user's usage and suggestions in many mills, and innovatin