...

Cement Clinker Grinding Apparatus


2018-09-27 17:03:23

Cement Clinker Grinding Apparatus

What is the cause of the blocking of the Cement Clinker Grinding Mill?

Repairs are required after the Cement Clinker Grinding Mill has been in use for a period of time. For example, in daily work, mobile crushing machines have various failures, such as the occurrence of blocking materials is very common. This has a serious impact on production, so what is the cause of the blockage of the Cement Clinker Grinding Mill? We will make a detailed introduction.

The first is uneven feeding. When the feed is too fast, moving the crusher will result in insufficient grinding. The finished product cannot be discharged in time according to the function of the blower and along the circulation pipe. In the event of material build-up, the blower will increase the load. The powdery material accumulates and causes an open circuit, which leads to blockage of the air duct. Therefore, we need to ensure that the feed to the Cement Clinker Grinding Mill continues to be uniform.

Second: The dust collector does not work properly. The dust collector is a very important accessory for the Cement Clinker Grinding Mill to maintain normal operation. The bag filter is mainly used to recover the increased airflow and simultaneously remove dust particles during the air flow. Then, after the electric discharge machine, the amount of exhaust air is increased. When the bag filter is unable to properly dust, large dust particles are easily accumulated to form an air duct to cause congestion of the circulation air path. If this is the case, it is necessary to stop production and start inspections in a timely manner.

Third, the fan power is insufficient. If the blower power of the Cement Clinker Grinding Mill is insufficient, a lack of air volume may occur, which makes the material unable to flow normally in the air duct and causes accumulation of materials. In order to ensure the normal material transmission under the action of the circulating air passage blower, the normal operation of the blower must be maintained, and the wind is not too small, and the material transportation of the fan is difficult. Maintaining the rated power of the Cement Clinker Grinding Mill and the stability of the normal operating voltage is a prerequisite for maintaining stable and long-lasting production.

...
Leave Message

...
Raw Ore Milling Equipment In Cement Plant 2018-09-27 17:03:23

Precautions of Raw Ore Milling EquipmentA company's 2000t/d new dry process cement production line and raw meal preparation system adopt Raw Ore Milling Equipme

...
Roller Ore Milling Equipment For Sale 2018-09-27 17:03:23

Roller Ore Milling Equipment Vibration ReasonThe Roller Ore Milling Equipment is very easy to stop in the later operation, and there are many reasons for the vi

...
Continuous Ball Ore Milling Equipment 2018-09-27 17:03:23

Continuous Ball Ore Milling Equipment "Run Rough"Continuous Ball Ore Milling Equipment is widely used in mine, metallurgy, cement and other industries. It is an

...
Garnet Ore Milling Equipment 2018-09-27 17:03:23

Installation and maintenance of Garnet Ore Milling EquipmentThe maintenance of Garnet Ore Milling Equipment is a very important and regular job. It should coope

...
Cement Vertical Ore Milling Equipment 2018-09-27 17:03:23

How To Improve The Performance Of Cement Vertical Ore Milling EquipmentVertical Ore Milling Equipment in the coal mine is widely used, with China's economy and

...
T130X Strengthen Ultrafine Mill 2018-09-27 17:03:23

T130X Strengthen Ultrafine Mill, which is based on the market research, and statistically analyzes the user's usage and suggestions in many mills, and innovatin



Products Recommended
Project
News