...

Garnet Ore Milling Equipment


2017-12-27 20:41:42

Garnet Ore Milling Equipment

Installation and maintenance of Garnet Ore Milling Equipment

The maintenance of Garnet Ore Milling Equipment is a very important and regular job. It should cooperate closely with the operation and maintenance of Garnet Ore Milling Equipment, and full-time personnel should be on duty for inspection.

Maintenance of Garnet Ore Milling Equipment

33.jpg

  • 1. The bearings of the Garnet Ore Milling Equipment bear all the load of the machine, and good lubrication can effectively prolong the life of the bearing. The bearing directly affects the service life and running rate of the Garnet Ore Milling Equipment. Therefore, the lubricating oil required for injection must be clean and the seal must be good. The main oil injection parts of the machine include rotary bearings, roller bearings, all gears, movable bearings and sliding planes.
  • 2, the installation of the new tyre must be examined often prone to loose.
  • 3, pay attention to the work of each part of the Garnet Ore Milling Equipment is normal.
  • 4. Check the wear degree of the worn parts, and change the worn parts at any time.
  • 5, put the movable device's underframe plane, and dust and other things should be out, so that the machine can't move on the bottom frame when the machine meets the material that cannot be broken, resulting in a serious accident.
  • 6, bearing oil temperature rise, should stop immediately check the reason to eliminate.
  • 7, a rotating gear should be checked immediately and eliminated if there is a shock sound in operation.

Installation Of A Test Car

333.jpg

  • 1. The Ore Milling Equipment should be installed on the base of the horizontal concrete and fixed with the anchor bolt.
  • 2, the installation should pay attention to the vertical of the main body and the level.
  • 3. After installation, check whether the bolts of each part are loosened and whether the mainframe door is fastened or not, if the bolts are fastened.
  • 4. The power supply line and control switch are configured according to the power of the equipment.
  • 5, the inspection finished, carry on the empty load test, the test car can carry on the production normally.
...
Leave Message

...
Raw Ore Milling Equipment In Cement Plant 2017-12-27 20:41:42

Precautions of Raw Ore Milling EquipmentA company's 2000t/d new dry process cement production line and raw meal preparation system adopt Raw Ore Milling Equipme

...
Roller Ore Milling Equipment For Sale 2017-12-27 20:41:42

Roller Ore Milling Equipment Vibration ReasonThe Roller Ore Milling Equipment is very easy to stop in the later operation, and there are many reasons for the vi

...
Continuous Ball Ore Milling Equipment 2017-12-27 20:41:42

Continuous Ball Ore Milling Equipment "Run Rough"Continuous Ball Ore Milling Equipment is widely used in mine, metallurgy, cement and other industries. It is an

...
Garnet Ore Milling Equipment 2017-12-27 20:41:42

Installation and maintenance of Garnet Ore Milling EquipmentThe maintenance of Garnet Ore Milling Equipment is a very important and regular job. It should coope

...
Cement Vertical Ore Milling Equipment 2017-12-27 20:41:42

How To Improve The Performance Of Cement Vertical Ore Milling EquipmentVertical Ore Milling Equipment in the coal mine is widely used, with China's economy and

...
T130X Strengthen Ultrafine Mill 2017-12-27 20:41:42

T130X Strengthen Ultrafine Mill, which is based on the market research, and statistically analyzes the user's usage and suggestions in many mills, and innovatin



Categories
Project
News