T130X Strengthen Ultrafine Mill
T130X Strengthen Ultrafine Ore Milling Equipment, which is based on the market research, and statistically analyzes the user's usage and suggestions in many mills, and innovating the new milling machine on the basis of the original products. The machine meets the customer's demand for the production of 200-33 micron m (80-425Mesh) fine powder.
High Production Efficiency
- The body is completely soft connected with the base, and has no rigid contact, so that the vibration of the grinding cavity is passed to the body and the machine, and the precision of the powder selection is high.
- The analysis machine adopts frequency conversion speed control, which is more efficient than electromagnetic speed control, precise speed control, good maneuverability and high degree of automation.
- The by-pass collector is equipped with a dust isolation chamber, which enables some of the dusty parts to enter the lower part of the cyclone through bypass to reduce the chance of dust escaping from the outlet. Compared with the ordinary powder collector, the pressure loss of the by-pass collector is small and the efficiency of collecting powder is high, especially to collect the fine powder particles which are difficult to collect by the general collector.
High Operating Stability
- The base adopts high strength and anti vibration ductile iron - spheroidal graphite cast iron has the damping property of cast iron, the strength of the cast steel and the good impact resistance.
- It uses the de Flander speed reducer to make full use of the technical advantages of the professional reducer and improve the stability of the machine.
- The reducer and motor use triangle belt to transfer power, which is beneficial to overload protection.
After crushing the large pieces of material through the jaw crusher to the required particle size, the material is sent to the hopper by the hoist, and then the material is evenly and quantitatively sent to the main mill chamber by the electromagnetic vibrating feeder. After grinding material is fan airflow into classifier classification, in the separator impeller under the action does not meet the requirements of the fineness of the material into the grinding chamber of re grinding, comply with the requirements of the fineness of the material with the gas flowing through the pipeline into the cyclone powder collector, were isolated and collected, the discharging device is discharged the finished powder. The separated air flow enters the fan through the upper end of the cyclone powder collector. The system belongs to a closed loop system and operates under the state of positive and negative pressure.
Because the grinding grinding material interior is containing some water, grinding heat generated by gas evaporation will lead to the expansion of the grinding chamber changes the gas flow system, and the inlet and the pipe joint seal problem into the air outside the system within the gas loss to balance, therefore, by setting the the air outlet of the blower exhaust valve excess gas into the bag filter, and discharged after being purified, the regulating system flow balance and realize environmental protection production.
The grinding processing T130X strengthen superfine grinding machine is mainly suitable for metallurgy, building materials, chemical industry, mining and other mineral products, feldspar, calcite, talc can be grinding, barite, fluorite, rare earth, marble, ceramic, bauxite, manganese ore, iron ore, copper ore, phosphate rock, iron oxide red, slag, water, slag activity carbon, dolomite, granite, iron oxide yellow, soybean meal, chemical fertilizer, compound fertilizer, fly ash, bituminous coal, coking coal, lignite, Elize sand, gold, red mud, clay, kaolin, coke, coal gangue, clay, cyanite, fluorite, bentonite, stone rhyolite, muddy greenstone, Ye Layan, Ye Yan, Yixing rock, rock, Diego Xuan Wuyan, gypsum, graphite, insulation materials, processing in various humidity below 6% non flammable non explosive mineral materials.
- 1, the body is completely soft connected to the base and has no rigid contact. The vibration of the grinding cavity is prevented from transmitting to the body and the analysis machine, and the accuracy of the analysis is improved.
- 2, the base adopts high strength, anti vibration ductile iron. The spheroidal graphite cast iron has the damping property of cast iron, the strength of the cast steel, and the good impact resistance.
- 3. The decelerator is used to imitate de Flanders. We can make full use of the technical advantages of the professional reducer and improve the stability of the machine. The reducer and motor use triangle belt to transfer power, which is beneficial to overload protection.
- 4, the mainframe and reducer adopt elastic sleeve pin coupling. It avoids the easy disappearance of the nylon column pin and improves the reliability of the equipment.
- 5. High density blades are used in the analysis machine. The high density blade of the analyzer can improve the fineness and yield of powder selection. The practice shows that increasing the density of the blade can improve the fineness of the finished product when the speed is constant. In other words, under the same fineness, the high density impeller can lower the speed of the low density impeller, reduce the air flow resistance and increase the output. The impeller turntable has adopted a new structure to avoid the phenomenon of "running rough powder".
- 6, the analysis machine adopts frequency conversion speed regulation. The use of frequency conversion speed ratio is energy saving with electromagnetic speed control, precision control, good maneuverability of process control and high degree of automation.
- 7、Use the by-pass powder collector. The by-pass dust collector has a dust isolation chamber, which can make the dust with more dust through the bypass into the lower cyclone to reduce the opportunity for dust escape from the exhaust vent. Compared with the ordinary powder collector, the pressure loss of the by-pass collector is small and the efficiency of collecting powder is high, especially to collect the fine powder particles which are difficult to collect by the general collector.
- 8. The equipment is arranged with the same resistance scheme. Using the same resistance arrangement to avoid the difference of the two pulverized power, improve the pulverer collecting efficiency, reduce the internal circulation and improve the mill output.
- 9. The two outlet of the pulverer and the discharge port of the dust collector are arranged in the same line in a straight line. The same line is arranged in a straight line for the centralized collection of material, reducing the amount of labor and convenient for packing.
- 10, set up the maintenance platform. The maintenance platform is set up so that the maintenance of the mill is more convenient and safe.