In addition to the transmission force, the Brick Crusher Machine bracket mainly plays the role of insurance, that is, when the non-crushed material enters the crushing chamber, the bracket can be broken or bent first to protect other parts of the machine.
The Brick Crusher Machine consists of moving jaws, eccentric shafts, bearings, pulleys, etc. It is the main part of the transmission and withstand torque. 1. Dynamic E: It consists of the movable E-bracket and the active E-plate. The movable E-bracket is made of 35# cast steel and has been tempered. 2, bearing: the use of double row centripetal spherical roller bearings, and has fine-tuning, with the force and durability. 3, eccentric shaft: made of 45 # steel car, and after quenching and tempering treatment. 4. E-plate: divided into two kinds of activities and fixed. In order to improve the crushing effect, the surface adopts optimized tooth shape. The material adopts ZGMN13 with high hardness, wear resistance and good use effect.
It is used to adjust the size of the discharge opening and control the discharge granularity. The Brick Crusher Machine adjustment mechanism has two forms: the lifting block type and the ejector gasket type. The adjustment is convenient and flexible, and the stepless adjustment can be realized.
The main component type of the fixture, the manufacturing process of the machine consists of two types; medium carbon steel casting frame and medium carbon steel plate welding frame. The welding frame is based on the original casting frame and adds a number of strong ribs. Through strict quality control and specific process requirements, it can achieve the same effect as the casting frame. In order to prevent serious wear on the side wall of the frame. The guard plates are installed on the left and right side walls of the Brick Crusher Machine chamber and can be replaced at will.