The Calcium Carbonate Crusher is no stranger to the crushing and screening industry and is widely used in the crushing of various ores and bulk materials in industries such as mining, building materials, roads, railways, water conservancy and chemical industry. The hammer is vital to the Calcium Carbonate Crusher, and its quality affects the efficiency of the Calcium Carbonate Crusher.
The Calcium Carbonate Crusher generally has 36 hammers, which are the key components of the crushed material and, therefore, are the most susceptible to wear. When the front edge of the hammer head is worn to a certain extent, the hammer head can be used for the flange, and the worn hammer head can be repaired by the wear-resistant alloy, which can save a lot of metal material consumption.
The installation of the hammer head is extremely strict and must be accurately weighed. The following are the specific standards: the working cylinder surface of the rotor, the hammer weights of the same radial plane should be equal or close to each other; the working cylindrical surface of the rotor is axially symmetrical. The total weight of the hammerheads shall be equal or close to each other, and the maximum deviation shall not exceed 0-20 kg; the arrangement of the hammerheads in the same row along the axial direction shall be the heaviest in the middle, and the weight shall be decremented or staggered at both ends.